Disk Recoup Disk copy utility for faulty hard drives that are not completely dead

Disk Recoup is a disk copy utility for faulty hard drives that are not completely dead. It can clone hard drives with bad media spots (sectors) and other non-critical hardware faults that may cause other data recovery utilities to hang. Disk Recoup™ uses both hardware-level disk commands and intelligent algorithms to copy the raw data from the source drive to another hard drive. Disk Recoup™ accesses the source drive strictly in read-only mode and presents no risk to the source drive except for normal wear and tear.

For Disk Recoup to work, the drive must still be detected by the computer BIOS at boot time and respond to basic disk commands.

In the best-case scenarios, the destination drive will be accessible normally in Windows® Explorer after the copy operation is complete and the computer is rebooted. In other scenarios, the drive is not directly accessible but the files and folders it contains can be recovered using a file recovery utility such as File Scavenger®. See "What is copied".

While copying a faulty hard drive, Disk Recoup and even Windows® may hang on reading a bad spot on disk. That usually requires a reboot. When it is restarted, Disk Recoup™ will intelligently avoid the bad spot and continue to copy other parts of the hard drive. A badly damaged drive may require a few reboots. Eventually Disk Recoup™ will copy all readable data.

Disk Recoup can be used in the following cases:

• A hard drive contains many bad media spots (sectors) which cause other data recovery utilities to hang.


• A hard drive is accessible after the computer is booted up but may go offline later without warning.


•  A hard drive is detected by the computer BIOS at boot time but may cause the computer to hang later.


• The drive electronics have partially failed and only respond to basic disk commands.

Disk Recoup™ does not work in the following cases:

• A hard drive has a mechanical failure and does not spin up.


• The drive electronics have completely failed and do not respond to any disk commands.


• A hard drive is not detected by the BIOS when the computer is turned on.

In other words, Disk Recoup can copy a faulty hard drive that is not completely dead. A dead hard drive must be sent to a clean room facility where it is read with special hardware equipment. Sometimes faulty components must be replaced. Fortunately, a large majority of faulty hard drives can be copied. See "Determine the status of a hard drive".

Disk Recoup is not required when a hard drive has no hardware faults but data is not accessible in Windows Explorer due to corruption or accidental deletion of partitions. In this case use a file recovery utility such as File Scavenger to recover files.

Disk Recoup supports the following types of storage devices, listed in the order of Disk Recoups effectiveness:

• IDE drives and SATA drives.


• SCSI, SAS and USB drives.


• Zip drives, CD, DVD, memory cards (such as Memory Stick, Compact Flash, MMC, SD, xD, etc.), and other removable devices.

Download Disk Recoup from link below :
web developer

Read More..

Speed up Large File Copy with TeraCopy Software

Copying a large data more than 1 GB and it takes quite a long time. Of course this requires a patience in waiting for the process to wait until the file copy is complete.
However, this time there are the latest tips and tricks from tricks-collections.com about speed up file copy and certainly is shorter in the process of waiting for copy files such as copying large files such as game master, master program or video whether it is formatted Avi, Mkv, Wmv, and other large files.
To speed up the process of copying data/files are needed for a piece of software that called TeraCopy to speed up the copy of the file. This Software is an application that is informative as it gives some related facilities process of copying your data. So, you don’t have to wait any longer in the process of copying data.

To use the TeraCopy software to speed up the process of copying follow the steps below:

1. Download TeraCopy application on your computer, download it here.
2. Install TeraCopy application on your computer.
3. Automatically when you perform the activity of large size file copy this application will be active.

Some of the main features in the TeraCopy:

1. Shell Integration – After the Install process, TeraCopy automatically replace the Copy of windows. In addition, this process can also be deactivated.
2. Copy files faster – TeraCopy uses different techniques with how to copying files on Windows.
3. Pause and Resume copy process – One of the interesting features because we can pause the process of copying files and resumed some time later.
4. Error recovery – If there is an error in the file copy process, TeraCopy will read the file several times. And over/skip and continued the process of copying files.
5. Displays a list of files is more informative, and can save the information to a text file.
6. Supports Unicode

With this problem in the length of time waiting for files to copying to the large size already resolved by using solutions speed up copy files with Teracopy software.

Read More..